2nd Hand

 
 
Also check out our new products !
Description & Images

LASERLUCHS® Dimmer

Type:LA-DIMMER01

This laser was developed especially for dimmer LASER LUCHS® IR-Laser develops and enables a continuous control of the output brightness. You will get in all lighting conditions and an optimum contrast image. Glare due to reflections in the vicinity be avoided.
The LASER LUCHS® Laser + dimmer combination makes it even more versatile night vision device.
LASERLUCHS® Dimmer - Type: LA-DIMMER01 € 107,43 excl. VAT / € 130,- incl. VAT

Left over from the fairs, now only € 60,-


click on the image for a magnification
Technical data
Laser-Dimmer TypeLA-DIMMER01
BatteryCR123 or Accu Li-ion CR123A
Dimmer Modusprogressive Dimmodus, 0-100% in 35 Steps
Pulse-Shift-Modus0-200Hz in 1Hz Steps
Microcontroller8bit MCU RISC 8Mhz
Power use in Stand-by Modus15A
Also check out our new products !
Description & Images

DEDAL FRONT SNIPER D-541

  • A new system to mount on the front side from the riflescope.
  • There is no lost of light or eyedistance, and you can use your normal focus and magnification from your riflescope.
  • There is no limit in reticle, even a dot can be used together with this Front sniper.
  • Longe range of vision (450-700 m)
  • Shockproof with the use of heavy recoil (incl. .375 H&H, .416 Rigby,)
  • Automatic brightness control
  • High quality especially night optics
  • Protection of the device against excess of a general level of light exposure
  • Long eye relief and High quality of the image on all field of the screen vBuilt-in high-power (75mW) hazard-free IR illuminator with adjustable power
  • Water resistance


Delivery: Nightscope include 1 adapter and oculair and softcase.

accessories:
magnifier Monucular to use as a viewer, use only as a handheld scope (Not together with a riflescope)
€ 160,- exl. VAT / € 193,60 incl. VAT.

NEW ; Rusan special adapters for Front Snipers Systems compartible with riflescopes 42 / 50 / 56
Price € 160,- incl. VAT per piece.


Photonis Comm grade€ 4000,00 incl.VAT

2nd hand, in commission by customer
NOW € 2750,-

No return possible on this second hand item


XR5™ XD-4™ ONYX

ONYX is the optional black & white (B&W) vision of PHOTONIS. ONYX is available as option on XD4™ and XR5™.

click on the image for a magnification
Technical data
Magnification1 x, dependent of ZF setting to maximal 6x Magnification
objectief 78mm-G2-F/1.5, T/1.6 standard high-aperture objective lens for tube Gen. IIs & Photonis
Field of view8,8°
Diopter adjustmentdependent of your ZF setting
Intensifier tubeGEN 2S, DEP-O, XD-4, XR-5, ONYX
Resolution36-72 Lp/mm
Gain> than 30.000 to 50.000
IR-illuminatorYes ,75 mW in 2 stages
Detection range> than 500 Mtr
Recognition range> than 200 Mtr
Weight610 gram
Dimensions17 x 6,2 x 8 cm.
Power Supply1 pc. 3 Volt Lithium CR-123
Battery Lifeca 60 hours

PLEASE PAY ATTENTION : When you have a Blaser gun with a low riflemount, then there might be problems to fit the adapter on the scope because there in not enough space between the scope and gunbarrel. The minimum space you need is 0,5cm or more for a proper fit, also the standard riflesight/keep on the barrel maybe removed when the D-542 Frontsniper hits it.

When you are not sure about this, please call us for more information.

Also check out our new products !
Description & Images

Dipol TFA 1200 Thermo Front Sniper Scope

NEW / NEW / NEW

Additionally to that, an optional, interchangeable eyepiece allows the TFA 1200 to be used as a stand-alone weapon scope with a choice of multiple reticle patterns to cycle through. In observation mode, the TFA 1200 can be used with a magnifier monoculair.

The TFA 1200 Clip-Ontrade; Thermal Imaging Sights offer weapon sight functionality at a reasonable price compared to other systems on the market.
Its multiple weapon use applications, stand alone and handheld capability make it a truly unique device.

TFA 1200 scopes have built in collimator which has 50 Hz refresh rate and silence shutter. The resolution is 384x288 pixel. He O-LED monitor has a resolution by 800x600 Dpi and can be used up to minus 40° C.

The screen shows Black/white and 6 different colors at your choice on the monitor.

the Thermal scope can be used as a handheld one, or combine with almost all day riflescopes for hunting.

  • Unparalleled Performance Uncooled FPA
  • High Refresh Rate: 50 Hz
  • Shutterless & Soundless XTi™ Technology
  • Low Power Consumption
  • Digital Zoom controls 2x-4x
  • Black Hot/White Hot Polarity and 6 different colors at your choice.
  • Silence shutter
  • Manual/Automatic Sensitivity Control
  • Manual Brightness Control
  • High Resolution 800x600 Dpi / O-LED display
  • 2,5 hours operation on 2 piece CR 123 batteries
  • Video Out, ready for wireless transmission
  • Self adjustable focus
  • HMD-640, Head Mounted Display (optional)
**Basic set supplied with 2 oculair, one mounting bracket, of needed diameters of inserts which should match diameters of day time scopes intended to be used with the scope.
Dipol TFA 1200 Thermo Front Sniper Scope € 6570,25 excl VAT.
€ 7950,00 incl. VAT

Now as a demo only € 5900,-



click image for a magnification
Technical data
Magnification1 x standard(50mm Germanium lens)
Field of view
Diopter adjustmentZF
Intensifier tubeno tube, but Germanium Thermo Sensor
Display Resolution800x600 Dpi / O-LED 17uM
Gain50Hz. with Germanium Thermo Sensor at absolute darkness 100%.
IR-illuminatorno
Detection range> 1200 Mtr
Recognition range> 400-600 Mtr
Weight780 gram
Dimensions20,0 x 8,1 x 8,1cm.
Power Supply2 pcs. 3 Volt Lithium CR-123
Battery Lifeca 2,5 hours continuous
Basic set supplied with 2 oculair, one mounting bracket, of needed diameters of inserts which should match diameters of day time scopes intended to be used with the scope.
Also check out our new products !
Description & Images

Pulsar Digital riflescope Digisight N770A 915 Nm ROODWILD ZEKER

Digital riflescope Digisight N770A is a perfect combination of the latest developments in the field of optics and electronics. Along with good optical characteristics (fast aperture focusable lens 50 mm f1.0, 67 mm eye relief) the riflescope features a wide Detection range of options which allow it to be tuned to one's personal needs. The riflescope uses a highly sensitive CCD array (with a Detection range of operation illumination 0.00003 - 30000 lux), image is transmitted to a VGA display, 752x582 pixels. The Digisight N770A also has Sum Light™ function which automatically increases CCD array sensitivity under low light conditions and till 20C minus.
The screen displays information on operation status (running time, low battery indicator, camera operation mode). One of the remarkable features is the possibility of zeroing the riflescope not only in the traditional manner but also using a new "one shot zeroing" method. This makes the zeroing procedure significantly faster and more convenient.
The Digisight N770A has several switchable pre-loaded reticles of various shapes. Apart from this, the user can upload optional reticles. Reticle inversion (color change from white to black and vice versa depending on the target colour) and enhanced contrast function are very useful too. The riflescope is equipped with a built-in IRLaser Illuminator 915 Nm ROODWILD ZEKER which should be used in low light conditions in the nighttime. The Weaver rail on the side of the body allows an auxiliary, more powerful IR Flashlight (please refer to section "Accessories") or VRC640 video recorder to be attached. Basic control functions (switching on/off the riflescope and the IR Laser Illuminator, reticle inversion) can be performed with the help of the included remote control.
The riflescope also features a jack performing two functions - Video Out (to conduct video recording to external devices without the use of additional adapters and camera or camcorders) and Video In (can be used to display on the riflescope's screen information transmitted from remote cameras via radio channel).
The Digisight N770A is resistant to bright light exposure and features excellent operational characteristics. The riflescope can be mounted on a wide Detection range of hunting weapons including those of large calibers (shock resistance is guaranteed if cartridges with muzzle velocity not exceeding 6000 Joules are used). The riflescope operates on four (rechargeable) batteries but can also be powered with an external power supply. Digisight N770A is designed for hunting, sports shooting, night video recording, general observation.

The N770A has a high resolution 752 x 582 pixels O-LED monitor.
It has a 3 powerstep IR Laser, 915 Nm ROODWILD ZEKER
Magnification from 4,5 tot 6,75x by zoom.

Memory for 3 types of weapons / calibers to put into the nightscope.
The new N770AA has black or white at your choice reticle and in total a choice at 13 different reticles in the memory function.

Sales to European Countries
only with an End user statement !
Pulsar Digital riflescope
Digisight N770A
€1363,63 excl. VAT / € 1650,00 incl. VAT

2nd hand, incl. EPS-5 battery, in commission by customer, NOW € 650,-

No return possible on this second hand item



Technical data
Magnification4,5x6,75 by zoom
Field of view5,2°
Diopter adjustment+4/-6
Intensifier tubeDigital performance like Gen 2+
Resolution55 Lp/mm
Gain> 30.000
IR-illuminatorYes , 3 powerstep laser, 915 Nm.
Detection range> 550 Mtr
Recognition range> 350-400 Mtr
Weight990 gram
Dimensions320 x 60 x 90mm
Power Supply4 pc. AA Mignon Penlite.
Battery Lifeca. 7 hours
click on the image for a magnification
Also check out our new products !
Description & Images

THE NEW DEDAL FRONT SNIPER D-552 DIM

NEW NEW !!

  • A new system to mount on the front side from the riflescope.
  • There is no lost of light or eyedistance, and you can use your normal focus and magnification from your riflescope up till 12x .
  • There is no limit in reticle, even a dot can be used together with this Front sniper.
  • Longe range of vision (450-700 m)
  • Shockproof with the use of heavy recoil (incl. .375 H&H, .416 Rigby,)
  • Automatic brightness control
  • The D-552 DIM has a Tube with gainless brightness control for more or less light on the tube.
  • High quality especially night optics
  • Protection of the device against excess of a general level of light exposure
  • Long eye relief and High quality of the image on all field of the screen.
  • Water resistance
Delivery: Nightscope include 1 adapter and rubber oculair and softcase.

accessories:
magnifier Monucular to use as a viewer, use only as a handheld scope (Not together with a riflescope)
€ 160,- exl. VAT / € 193,60 incl. VAT.

NEW ; Rusan special adapters for Front Snipers Systems compartible with riflescopes 42 / 50 / 56
Price € 160,- incl. VAT per piece.


Photonis Comm grade€ 5000,00 incl. VAT

Now as a demo, only € 4000,-


XR5™ XD-4™ ONYX

ONYX is the optional black & white (B&W) vision of PHOTONIS. ONYX is available as option on XD4™ and XR5™.

click on the image for a magnification
Technical data
Magnification1 x, dependent of ZF setting to maximal 12x Magnification
objectief 78mm-HC-F/1.5, T/1.6 high-contrast and high-aperture objective lens for tube Gen. IIs and Gen. III.
Field of view8,8°
Diopter adjustmentdependent of your ZF setting
Intensifier tubeGEN 2S, DEP-O, XD-4, XR-5, ONYX
Resolution36-72 Lp/mm
Gain> than 30.000 to 50.000
IR-illuminator-
Detection range> than 500 Mtr
Recognition range> than 200 Mtr
Weight610 gram
Dimensions23,5 x 6,2 x 8 cm
Power Supply1 pc. 3 Volt Lithium CR-123
Battery Lifeca 60 hours

PLEASE PAY ATTENTION : When you have a Blaser gun with a low riflemount, then there might be problems to fit the adapter on the scope because there in not enough space between the scope and gunbarrel. The minimum space you need is 0,5cm or more for a proper fit, also the standard riflesight/keep on the barrel maybe removed when the D-542 Frontsniper hits it.

When you are not sure about this, please call us for more information.

Also check out our new products !
Description & Images

DIPOL DN-37PRO Front Sniper Night attachment. NEW / NEW.

The newly developed cross-Dipol DN37PRO night vision viewer does not affect the precision shot, to be delivered with GEN II + tube with a green or black/white view, the tube has a high resolution of 54 lp / mm.

Dipol made this front attachment especially for short distances up to maximum 90/100 Mtr, and magnification 4/5 times. His length is only 13,5 cm. and weight only 540 gramm.
This new DN37PRO has a tube dimmer to reduce light when there is a full moon or snow.
DESIGN: This viewer can be used without major modification to your rifle scope. Use with standard variable scopes for hunting may be used to increase up to 4/5x. (not allowed in Germany and Belgium) or use with a binocular or Camera.
The new DN37PRO has a lens to focus, from about 12mtr till maximum 90/100 tr. for a sharp image.
The viewer is able to an IR lamp to screw. Included is an ultra strong and supper comp act IR laser of 100 Mw and 850 Nm.
The DN37PRO can use the adapter to any standard hunting optics are mounted.

The new PRO has left and right a weaver-rail to mount the IR-Laser, easy handling for using the Laser, new battery housing and modified On/Off switch.

DIPOL DN-37PRO Front Sniper
The Best Sniper GEN 2 + on the market!
€ 2500,00 incl.VAT

Now as a demo € 2200,-



Accessories

2 times maginfier Oculair to use the DN34 as handheld spotting scope.
Price € 160,- excl VAT/ € 193,60 incl. VAT

3x and 5x times maginfier Oculair to use the DN34 as handheld spotting scope.
Price € 225,- incl. VAT

NEW ; Rusan special adapters for Front Snipers Systems compartible with riflescopes 42 / 50 / 56
Price € 160,- excl VAT/ € 193,60 incl. VAT per piece.


Gummi oculair Without magnification
Prijs € 49,60 excl VAT / € 60,00 incl VAT.

click on the image for a magnification
Technical data
Magnification1 x, depends on ZF settings till maximum 4x magnification
Field of view8,8°
Diopter adjustmentdepends on ZF settings
Intensifier tubeGen 2+
Resolution54 Lp/mm
Gain> 30.000
IR-illuminatorYes, mountable 100 Mw compact laser
Detection range>140 Mtr
Recognition range> 90 Mtr
Weight540 gram
Dimensions13,5 x 6,4 x 8 cm.
Power Supply1 pc. 3 Volt Lithium CR-123
Battery Lifeca 60 hours

NOTE:
for example, the Blaser rifle scope mounted very low on the weapon and has no room for the adapter to slide on the rifle scope. To this end, the space increases, so the viewer with power adapter over the course of Voorhout / keep hanging.
Minimum distance between the barrel and rifle scope with the sniper in front adapter must be approximately 0.5 cm. If you are unsure about the gun and mounted rifle scope, call us for advice.

Also check out our new products !
Description & Images

Thermal Viewer DALI-25

No dealer sales.

mit 384x288 Pixel Auflösung für Reichweiten bis 800m möglich. Es wird kein anderer Restlichtaufheller benötigt.

Die Kompaktoptik DALI-25 aus dem Hause Liemke verfügt über wackelfreie 50Hz Bildfrequenz und ist derzeit führend im Vergleich zu anderen Kompaktoptiken mit selbiger Auflösung. Wärmequellen lassen sich in drei verschiedenen Betrachtermodi darstellen und bei Bedarf 2-,3- oder 4-fach vergrößern.

Bildübertragung per WiFi
per App auf Tablet-PC oder Smartphone

Mit der Wärmebildkamera DALI-25 können Sie Bilder kabellos per WiFi während des Betrachtens auf Ihr Tablet-PC oder Smartphone übertragen. Natürlich verfügt die Kamera auch über einen Videoanschluß und Micro-USB-Port.

Robustes Design
mit Anwendungsmöglichkeiten für PKW, Überwachung oder Jagd

Das DALI-25 ist nach Ip66 zertifiziert und gegen Staub und Wasser geschützt. Design und Ausstattung der Kamera ermöglichen eine Vielzahl von interessanten Anwendungsmöglichkeiten, z.B. PKW gestützt oder als stationäre Überwachung auf dem Kanzeldach mit einem motorisierten Stativkopf.

Technische Merkmale Kompakte Wärmebildoptik
  • 50Hz Bildfrequenz
  • 25mm Objektivlinse
  • 384x288 Pixel Auflösung
  • 22x16° Sehfeld
  • Dioptrienverstellung
LCD Farbdisplay
  • 640x480 Pixel Auflösung
  • 1,8fache optische Vergrößerung
  • 2-/3-/4-facher digitaler Zoom
  • integrierter Markierlaser
  • fixer Objektivfokus
3 Betrachtermodi
  • Wärme = schwarz
  • Wärme = weiß
  • Wärme = weiß + rot
  • zusätzliche HotSpot Tracking Funktion
Starke Batterie
  • Batteriestandzeit bis 6 Std. Dauerbetrieb
  • Micro-USB-Buchse zum Laden
  • Integrierter Li-Io Akku
Bild- und Videoaufnahmen
  • Bilder per WiFi übertragen
  • Video-Ausgangsbuchse
  • PAL Videoformat
Robustes Gehäuse
  • IP66 Schutzklasse
  • ¼” Stativgewinde
  • 70x70x180mm (BxLxH)
  • 490g Gewicht
DALI-25

Now as a Demo Price € 1650,-



click image for a magnification
Technical Data
Reichweitebis 800m
Bildfrequenz50 Hz
BauartMonokular
GrößeTaschenformat
Auflösung384x288 Pixel
Linsengröße25mm
Zoom2-4x
AufnahmefunktionNein
Gewicht490g
Pitch25µm
Also check out our new products !
Description & Images

Dipol DN38RO Front Sniper with Photonis tube and mirror lens.

NEW / NEW

The newly developed Dipol DN38PRO mit mirror lens night vision viewer does not affect the precision shot, to be delivered with Photonis tubes, the tubes have a high resolution of 60 lp / mm.

DESIGN: This viewer/night attachment can be used without major modification to your rifle or riflescope. Use with standard variable scopes for hunting may be used to increase up to 6x.

There is less light loss due its new Mirror-lens construction. The scope has a remote control to switch on/off the scope. This scope has a battery test function too, and you can use calibers up to 6300 Joule.
The new DN38PRO has a mirror lens to focus, from about 15mtr. to infinity for a sharp image.
The viewer is able to screw on both sides off the scope a IR laser lamp.
Included is an ultra strong and super compact IR laser of 100 Mw / 850 Nm.

Delivery: Dipol D38PRO with an adapter, IR Illuminator and carrying case.

Dipol DN38PRO Photonis PHOTONIS ONYX black/white view € 4900,- incl. VAT



click on the image for a magnification
Technical data
Magnification1 x, depends on ZF settings till maximum 6x magnification
Field of view
Diopter adjustmentdepends on ZF settings
Intensifier tubePhotonis : Commercial grade , XD-4 , XR-5 und ONYX b/w
Resolution> 60 Lp/mm
Gain> 30.000
IR-illuminatorYes, mountable 100 Mw
Detection range>500 Mtr
Recognition range> 200 Mtr
Weight660 gram
Dimensions15,5 x 7,7 x 6,3 cm.
Power Supply1 pc. 3 Volt Lithium CR-123
Battery Lifeca 60 hours

PLEASE PAY ATTENTION :
When you have a Blaser gun with a low riflemount, then there might be problems to fit the adapter on the scope because there in not enough space between the scope and gunbarrel. The minimum space you need is 0,4cm or more for a proper fit, also the standard riflesight/keep on the barrel maybe removed when the GT-2 Frontsniper hits it.
When you are not sure about this, please call us for more information.

Also check out our new products !
Description & Images

CTS-250 17uM Thermo Front Sniper Scope

NEW / NEW / NEW

GSCI‘s Clip-On™ thermal scopes CTS-250 17uM are designed for short to medium range engagements. Utilizing the quick detach weapon mount, the CTS- 250 17uM easily attaches and detaches from standard M1913 Picatinny rails in front of day scopes. This gives the operator the ability to deploy it on multiple weapon platforms without the need to dedicate a thermal scope.

Additionally to that, an optional, interchangeable eyepiece allows the CTS-250 17uM to be used as a stand-alone weapon scope with a choice of multiple reticle patterns to cycle through. In stand-alone mode, the CTS-250 17uM can act as a 2X optical magnification and additionally to utilize the 2X or 4X electronic zoom.

These systems are manufactured by GSCI‘s Government Systems division, designed and fully hardened to MILSPEC. The CTS-250 17uM provides extreme versatility for the modern War-fighter and Law Enforcement Professional. The scopes are designed primarily for the M4/M16 platforms, allow to be fully calibrated to maintain bore sight with the host day scope.

The CTS-250 17uM Clip-Ontrade; Thermal Imaging Sights offer weapon sight functionality at a reasonable price compared to other systems on the market.
Its multiple weapon use applications, stand alone and handheld capability make it a truly unique device.

CTS-250 17uM scopes have built in collimator which allows to use them without mounting on the M1913 Picatinny rails in front of day scopes, but rather “hang” them to the objective of day scope.

*The User must realise that, while using such mounting method, he will have to understand and adjust “3D-optical axis” discrepancies while mounting CTS-250 17uM.
  • Unparalleled Performance Uncooled FPA
  • High Refresh Rate: up to 30 Hz
  • Shutterless & Soundless XTi™ Technology
  • Low Power Consumption
  • Digital Zoom controls 2x-4x
  • Black Hot/White Hot Polarity
  • Hot Swappable Batteries
  • Manual/Automatic Sensitivity Control
  • Manual Brightness Control
  • High Resolution 640 x 480 Dpi / O-LED display
  • 24 hours operation
  • Video Out, ready for wireless transmission
  • Self adjustable focus
  • HMD-640, Head Mounted Display (optional)
**Basic set supplied with 2 times magnification oculair,, one mounting bracket, Type 1 or Type 2 and up to 4 pcs. of needed diameters of inserts which should match diameters of day time scopes intended to be used with CTS-250.

diameters:
Type1. From 40 through 50 mm.
Type2. From 51 through 62 mm.

THERMAL FRONT SCOPE CTS-250 17uM

Second hand, sale for our customer, only € 4750,-

No return possible on this second hand item


click on the image for a magnification
Technical data
Magnification1 x standard en 2x till 4x Digitaler zoom (50mm Germanium lens)
Field of view
Diopter adjustmentPossible by your riflescope
Intensifier tubeNo tube but Germanium Heath Sensor
Display Resolution640 x 480 Dpi / O-LED 17uM
Gain30 Hz. Germanium Heath Sensor, detection by 100% darkness
IR-illuminatorno
Detection range> 900 Mtr
Recognition range> 400-600 Mtr
Weight900 gram
Dimensions12,0 x 15,0 x 9,0cm.
Power Supply2 pc. 3 Volt Lithium CR-123
Battery Lifeca. 5 hours continue
Delivery with 1 adapter (type 1 or type 2) and 4 insert rings.

PLEASE PAY ATTENTION : When you have a Blaser gun with a low riflemount, then there might be problems to fit the adapter on the scope because there in not enough space between the scope and gunbarrel. The minimum space you need is 0,6/0.7cm or more for a proper fit, also the standard riflesight/keep on the barrel maybe removed when the D-542 Frontsniper hits it.
When you are not sure about this, please call us for more information.

Also check out our new products !
Description & Images

DIPOL DN-34PRO Front Sniper Night attachment. NEW / NEW.

With German BKA papers.

The newly developed cross-Dipol night vision viewer does not affect the precision shot, to be delivered with GEN II + tube with a green or black/white view, the tube has a high resolution of 54 lp / mm.
This new DN34PRO has a tube dimmer to reduce light when there is a full moon or snow.
DESIGN: This viewer can be used without major modification to your rifle scope. Use with standard variable scopes for hunting may be used to increase up to 6x. (not allowed in Germany and Belgium) or use with a binocular or Camera.
The new DN-34PRO has a lens to focus, from about 20mtr infinity for a sharp image.
The viewer is able to an IR lamp to screw. Included is an ultra strong and supper comp act IR laser of 100 Mw and 850 Nm.
The DN-34PRO can use the adapter to any standard hunting optics are mounted.

The new PRO has left and right a weaver-rail to mount the IR-Laser, easy handling for using the Laser, new battery housing and modified On/Off switch.



NEW Dipol DN34PRO B&W GEN 2+ € 2650,- excl.VAT / € 3206,50 incl.VAT

Now as a Demo Nu € 2750,00 incl. VAT

NEW ; this scope in Black & White tube for more light and brightness
SOLD



click on the image for a magnification
Technical data
Magnification1 x, depends on ZF settings till maximum 6x magnification
Field of view8,8°
Diopter adjustmentdepends on ZF settings
Intensifier tubeGen 2+
Resolution54 Lp/mm
Gain> 30.000
IR-illuminatorYes, mountable 100 Mw compact laser
Detection range>500 Mtr
Recognition range> 200 Mtr
Weight610 gram
Dimensions18 x 6,4 x 8 cm.
Power Supply1 pc. 3 Volt Lithium CR-123
Battery Lifeca 55 hours

NOTE:
for example, the Blaser rifle scope mounted very low on the weapon and has no room for the adapter to slide on the rifle scope. To this end, the space increases, so the viewer with power adapter over the course of Voorhout / keep hanging.
Minimum distance between the barrel and rifle scope with the sniper in front adapter must be approximately 0.5 cm. If you are unsure about the gun and mounted rifle scope, call us for advice.

Also check out our new products !
Description & Images

CYBER EYE incl. Adapter

Made in the USA
The Cyber Eye is a night scope with a 2+ Generation intensifier tube, by using a screwed-on assembly plate it is a super compact night-targeting-device for rifles.
The device is built in the USA and has a 2 year guarantee.
The magnification factor is 1x standard and standard a 40mW focusable IR illuminator (2 strength steps) is built in.
Cyber Eye Gen III € 5250,-

As a Demo NOW € 3700,-


XR5™ XD-4™ ONYX

ONYX is the optional black & white (B&W) vision of PHOTONIS. ONYX is available as option on XD4™ and XR5™.

click on the image for a magnification
Technical data
Magnification1 x
Field of view15°
Diopter adjustment+4 /- 5
Intensifier tubeGen 2+ , GEN 2S, DEP-O, XD-4, XR-5
Resolution36-72 Lp/mm
Gain> than 30.000 to 50.000
IR-illuminatorYes 50mW ; with 2 power steps
Detection range> than 600 Mtr
Recognition range> than 200 Mtr
Weight480 gram
Dimensions11 x 8 x 4 cm.
Power Supply1 pc. 3 Volt Lithium Cr-123
Battery Lifeca 50 hours
Delivered with 1x magnification. Optional is a 3x or 6x magnification lens.
Also check out our new products !
Description & Images

Eyepiece Booster GEN 2Super

This is a used night-vision device as well as a booster to buil don at your own Riflescope.
The unit is in very good condition and will be sold with 12 months warranty.
This device has a very high sight performance, and comes with adapter and infrared lamp.

Eyepiece Booster GEN 2Super € 3850,-

Sale for our customer. Now only € 2900,-

No return possible on this second hand item


click on the image for a magnification
Technical data
Magnification1 x
Field of view12.5°
Diopter adjustment+5 / -5
Intensifier tubeGEN IIS
Resolution55 LP/mm
Gain> than 40.000
IR-illuminatorno
Detection range350-400 mtr
Recognition range200-250 mtr
Weight640 Gr.
Dimensions13 x 6.0 x 7,5 cm
Power Supply1 x 3 Volt lithium CR123
Battery Life> than 60 hours.
Also check out our new products !